Standard Tool Offerings
Impact Tools
Hydraulic Bi-Di Fishing Jars
Hydraulic Bi-Di Fishing Intensifiers
Bi-Di Impact Hammer
Bi-Di Impact Hammer Accelerator
Fishing and Recovery Tools
Flow Release GS pulling Tool
Flow Release Slick Catch Spear
External HD Flow Release Overshot
External HD Flow Release JDC Overshot
Bowen Overshot Series 10,20,70 and 150
Itco Spear
Stabilisers (Rotating and Non-Rotating)
Lost Wire Fishing Package
Flow Control
Back Pressure Valve
Check Valve
Cementing Valve
Annular Circ Sub
Drop Ball Circ sub
Burst Disc Sub
Ported/Choke Sub
Kelly Cock Valve
Bleed Off Sub
Flow Diversion Tool
Ancillary
Knuckle Joints
Pump Thru Swivel
Free Travel Tool
Various Crossovers
Deployment Bar
Weight Stem
Cable By-pass Sub
Tubing End/Nipple
Locator
Impact Nozzles
Ported Blind Box
Flow Activated Centaliser
Surface Equipment
Hydraulic C- Plate
Dart and Ball Catcher
Landing Plate
Tool Clamps
Tubing Clamp
Test Plugs
Test Caps
Lift Subs
Pull Test Subs
C-Plate Collar
SUREFIRE INTENSIFIER
Operating Parameters
| TYPE | HYDRAULIC INTENSIFIER |
| MODEL | SUREFIRE |
| TORSIONAL YIELD LBS | 3,200 |
| TENSILE YIELD LBS | 185,000 |
| MAX. OVERPULL LBS | 32,000 |
| MAX. SETDOWN LBS | 32,000 |
| TYPE | HYDRAULIC INTENSIFIER |
| MODEL | SUREFIRE |
| TORSIONAL YIELD LBS | 1,200 |
| TENSILE YIELD LBS | 94,000 |
| MAX. OVERPULL LBS | 18,000 |
| MAX. SETDOWN LBS | 18,000 |
| TYPE | HYDRAULIC INTENSIFIER |
| MODEL | SUREFIRE |
| TORSIONAL YIELD LBS | 500 |
| TENSILE YIELD LBS | 50,000 |
| MAX. OVERPULL LBS | 9,000 |
| MAX. SETDOWN LBS | 9,000 |
Physical Dimensions
| TOOL OD INS | 2.875 |
| TOOL ID INS | 1.000 |
| OPEN LENGTH FT | 6.12 |
| CLOSED LENGTH FT | 5.22 |
| STROKE LENGTH INS | 10.76 |
| CONNECTIONS | 2-3/8" PAC Box x Pin |
| TOOL OD INS | 2.125 |
| TOOL ID INS | 0.750 |
| OPEN LENGTH FT | 6.12 |
| CLOSED LENGTH FT | 5.22 |
| STROKE LENGTH INS | 10.76 |
| CONNECTIONS | 1-1/2" AMMT Box x Pin |
| TOOL OD INS | 1.688 |
| TOOL ID INS | 0.563 |
| OPEN LENGTH FT | 6.12 |
| CLOSED LENGTH FT | 5.22 |
| STROKE LENGTH INS | 10.76 |
| CONNECTIONS | 1" AMMT Box x Pin |
Operating Parameters
| TYPE | HYDRAULIC INTENSIFIER | HYDRAULIC INTENSIFIER | HYDRAULIC INTENSIFIER |
| MODEL | SUREFIRE | SUREFIRE | SUREFIRE |
| TORSIONAL YIELD LBS | 3,200 | 1,200 | 500 |
| TENSILE YIELD LBS | 185,000 | 94,000 | 50,000 |
| MAX. OVERPULL LBS | 32,000 | 18,000 | 9,000 |
| MAX. SETDOWN LBS | 32,000 | 18,000 | 9,000 |
Physical Dimensions
| TOOL OD INS | 2.875 | 2.125 | 1.688 |
| TOOL ID INS | 1.000 | 0.750 | 0.563 |
| OPEN LENGTH FT | 6.12 | 6.12 | 6.12 |
| CLOSED LENGTH FT | 5.22 | 5.22 | 5.22 |
| STROKE LENGTH INS | 10.76 | 10.76 | 10.76 |
| CONNECTIONS | 2-3/8" PAC Box x Pin | 1-1/2" AMMT Box x Pin | 1" AMMT Box x Pin |
STEADY TRIGGER JAR
Operating Parameters
| TYPE | HYDRAULIC JAR |
| MODEL | STEADY TRIGGER |
| TORSIONAL YIELD LBS | 3,200 |
| TENSILE YIELD LBS | 190,000 |
| MAX. OVERPULL LBS | 36,000 |
| MAX. SETDOWN LBS | 36,000 |
| TYPE | HYDRAULIC JAR |
| MODEL | STEADY TRIGGER |
| TORSIONAL YIELD LBS | 900 |
| TENSILE YIELD LBS | 94,000 |
| MAX. OVERPULL LBS | 18,000 |
| MAX. SETDOWN LBS | 18,000 |
| TYPE | HYDRAULIC JAR |
| MODEL | STEADY TRIGGER |
| TORSIONAL YIELD LBS | 400 |
| TENSILE YIELD LBS | 50,000 |
| MAX. OVERPULL LBS | 9,000 |
| MAX. SETDOWN LBS | 9,000 |
Physical Dimensions
| TOOL OD INS | 2.875 |
| TOOL ID INS | 1.000 |
| OPEN LENGTH FT | 5.25 |
| CLOSED LENGTH FT | 4.5 |
| STROKE LENGTH INS | 9 |
| CONNECTIONS | 2-3/8" PAC Box x Pin |
| TOOL OD INS | 2.125 |
| TOOL ID INS | 0.750 |
| OPEN LENGTH FT | 5.25 |
| CLOSED LENGTH FT | 4.5 |
| STROKE LENGTH INS | 9 |
| CONNECTIONS | 1-1/2" AMMT Box x Pin |
| TOOL OD INS | 1.688 |
| TOOL ID INS | 0.563 |
| OPEN LENGTH FT | 5.00 |
| CLOSED LENGTH FT | 4.35 |
| STROKE LENGTH INS | 7.8 |
| CONNECTIONS | 1" AMMT Box x Pin |
Operating Parameters
| TYPE | HYDRAULIC JAR | HYDRAULIC JAR | HYDRAULIC JAR |
| MODEL | STEADY TRIGGER | STEADY TRIGGER | STEADY TRIGGER |
| TORSIONAL YIELD LBS | 3,200 | 900 | 400 |
| TENSILE YIELD LBS | 190,000 | 94,000 | 50,000 |
| MAX. OVERPULL LBS | 36,000 | 18,000 | 9,000 |
| MAX. SETDOWN LBS | 36,000 | 18,000 | 9,000 |
Physical Dimensions
| TOOL OD INS | 2.875 | 2.125 | 1.688 |
| TOOL ID INS | 1.000 | 0.750 | 0.563 |
| OPEN LENGTH FT | 5.25 | 5.25 | 5.00 |
| CLOSED LENGTH FT | 4.5 | 4.5 | 4.35 |
| STROKE LENGTH INS | 9 | 9 | 7.8 |
| CONNECTIONS | 2-3/8" PAC Box x Pin | 1-1/2" AMMT Box x Pin | 1" AMMT Box x Pin |
SPINSTRIKE
Description
The SpinStrike is a free floating swivel style sub. It rotates as well as damps loads from both above and below. There are standard sizes as well as custom sizes upon request.
Benefits
Multi-application damping tool to minimize shockloads transmitted by high impact creating tools
Short enough to incorporate in most completion and workover BHAs
Able to be custom configured for specific applications with known constraints
Configurable to increase or decrease impact with the same tool
Description
The SpinStrike is a free floating swivel style sub. It rotates as well as damps loads from both above and below. There are standard sizes as well as custom sizes upon request.
Benefits
Multi-application damping tool to minimize shockloads transmitted by high impact creating tools
Short enough to incorporate in most completion and workover BHAs
Able to be custom configured for specific applications with known constraints
Configurable to increase or decrease impact with the same tool
BIG DOG
Description
The Big Dog Hydraulic Disconnect represents one of the most important components of the BHA. It is an essential part of releasing the tubing from the BHA in the event it becomes stuck in the wellbore. It provides this safety feature while also being resistant to the tension and torsion of rigorous operations.
Benefits
Constructed to handle the increasingly higher torsional loads being generated by longer tubular strings and motors with elevated torque output.
Minimalistic design mitigates both the risk of improper redress, as well as the chances of failure in the wellbore. This reduces the costs associated with manufacturing and maintenance as an added benefit.
Description
The Big Dog Hydraulic Disconnect represents one of the most important components of the BHA. It is an essential part of releasing the tubing from the BHA in the event it becomes stuck in the wellbore. It provides this safety feature while also being resistant to the tension and torsion of rigorous operations.
Benefits
Constructed to handle the increasingly higher torsional loads being generated by longer tubular strings and motors with elevated torque output.
Minimalistic design mitigates both the risk of improper redress, as well as the chances of failure in the wellbore. This reduces the costs associated with manufacturing and maintenance as an added benefit.
WIRELINE RECOVERY
Tool Applications
Used during fishing operations for retrieving parted wireline back to surface.
Design Features & Benefits
Available in a range of sizes to suit most completion designs
Interchangeable 2, 3 or 4 pronged Grab Arm options
Simple, robust design ensuring easily operable for the end user
Selected components QPQ treated
Tool Applications
Used during fishing operations for retrieving parted wireline back to surface.
Design Features & Benefits
Available in a range of sizes to suit most completion designs
Interchangeable 2, 3 or 4 pronged Grab Arm options
Simple, robust design ensuring easily operable for the end user
Selected components QPQ treated
INDEXING TOOL
Description
The Indexing Tool is a thru-tubing tool designed specifically for perforating, fishing and re-entry. It utilizes both linear and hydraulic force to create motion. There is both a mechanical version and a flow activated version, with both coming in either left or right hand rotation.
Benefits
Easily recognizable downhole function
One of the shortest indexing tools in the industry
Functions off both hydraulic force and tension
Description
The Indexing Tool is a thru-tubing tool designed specifically for perforating, fishing and re-entry. It utilizes both linear and hydraulic force to create motion. There is both a mechanical version and a flow activated version, with both coming in either left or right hand rotation.
Benefits
Easily recognizable downhole function
One of the shortest indexing tools in the industry
Functions off both hydraulic force and tension
JAWS OF WIRE
Description
The saw-toothed sections of the Jaws of Wire are designed to act as a secondary means of retaining objects once the jaws close. The serrated edges function like slips in this fashion to both hold and to dig into the objects being pulled from the well. The grip can be altered by adjusting the spring tension. This leaves the option to also function test the Jaws of Wire at surface utilizing the whole tool or component that closest resembles what is currently lodged in the well itself.
Benefits
Flow activation with a dual and tri jaw design
Simplest configuration that yields the most robust design on the market
Design optimized to increase strength, reliability, cost efficiency
Customizable service connection and flow profile for any downhole situation
Optional component coating for grabbing fish with higher than normal Rockwell hardness
Description
The saw-toothed sections of the Jaws of Wire are designed to act as a secondary means of retaining objects once the jaws close. The serrated edges function like slips in this fashion to both hold and to dig into the objects being pulled from the well. The grip can be altered by adjusting the spring tension. This leaves the option to also function test the Jaws of Wire at surface utilizing the whole tool or component that closest resembles what is currently lodged in the well itself.
Benefits
Flow activation with a dual and tri jaw design
Simplest configuration that yields the most robust design on the market
Design optimized to increase strength, reliability, cost efficiency
Customizable service connection and flow profile for any downhole situation
Optional component coating for grabbing fish with higher than normal Rockwell hardness
IMPACT HAMMER
Tool Applications
To provide high frequency, bi-directional impact in conjunction with the Impact Intensifier.
Design Features & Benefits
Available in a range of sizes to suit industry standard Coiled Tubing BHA’s
Suitable for high temperature environments
Compact design ideal for restricted height applications
Simple, robust design ensuring ease of operation for the end user
Connection options to suit customer requirements
Option to configure to single direction only
Ability to increase mass when configured in single direction mode
Tool Applications
To provide high frequency, bi-directional impact in conjunction with the Impact Intensifier.
Design Features & Benefits
Available in a range of sizes to suit industry standard Coiled Tubing BHA’s
Suitable for high temperature environments
Compact design ideal for restricted height applications
Simple, robust design ensuring ease of operation for the end user
Connection options to suit customer requirements
Option to configure to single direction only
Ability to increase mass when configured in single direction mode