Standard Tool Offerings
Connectors
Internal Roll-On
Internal Dimple-On
External Slip Type
External Dimple Type
Spoolable Connectors
Motorhead and Disconnect Assemblies
HP Motorhead Assembly
HD Hydraulic Disconnect
Positive Displacement Motors
Evenwall Motors
Standard Motors
All Metal Motors
Slow Speed Motors
Rotary Tools
Flat Bottom Mills
Taper Mills
Ball Valve Mills
Step Mills
Junk Mills
Insert Mills
PDC Mills
Diamond Mills
Custom Built Mills
Washover Shoes
Triple Bushing Drive Subs
Tubing Cutter
Tubing Anchor
Underreaming Assemblies
Jet Motor
“SPINTORQ” WASH TOOL
Tool Applications
For chemical washing and jetting to remove, filter cake, cement residue, rust, scale, paraffins, and other obstructions from inside tubular walls.
Design Features & Benefits
Metal rotor/ stator drive assembly
Multi-Side Jet configurations to suit any application
Single downward facing jet
360 deg Coverage
Available for industry standard tubular sizes
Tool Applications
For chemical washing and jetting to remove, filter cake, cement residue, rust, scale, paraffins, and other obstructions from inside tubular walls.
Design Features & Benefits
Metal rotor/ stator drive assembly
Multi-Side Jet configurations to suit any application
Single downward facing jet
360 deg Coverage
Available for industry standard tubular sizes
TUBING CUTTER
Tool OD
| 1.700 | |
| 2.000 | |
| 2.250 | |
| 2.375 | |
| 2.500 | |
| 2.875 | |
| 3.000 | |
| 3.500 | |
| 4.000 | |
| 4.500 |
Max. Cutting OD
| 2.875 | |
| 3.500 | |
| 4.500 | |
| 5.000 | |
| 5.500 | |
| 6.125 | |
| 5.875 | |
| 7.000 | |
| 8.625 | |
| 9.625 |
Tool OD
| 1.700 | |
| 2.000 | |
| 2.250 | |
| 2.375 | |
| 2.500 | |
| 2.875 | |
| 3.000 | |
| 3.500 | |
| 4.000 | |
| 4.500 |
Max. Cutting OD
| 2.875 | |
| 3.500 | |
| 4.500 | |
| 5.000 | |
| 5.500 | |
| 6.125 | |
| 5.875 | |
| 7.000 | |
| 8.625 | |
| 9.625 |
FNP TRANSMISSION
Description
The FNP Mud Motor Transmission (FNP MMT) represents a step forward in the overall approach to strengthen mud motors to handle the larger diameter coiled tubing projects. As the laterals grow longer, the flow rates and torsional loading of the BHA increases. The FNP MMT is adaptable to any power section on the market.
Benefits
Mechanically designed and optimized specifically for the rigors of the future of extended reach operations.
The material for the flex shaft is optimized for enhanced elongation and deflection properties both to increase stator life while also optimizing stator engagement over the entirety of the thermal cycle.
Description
The FNP Mud Motor Transmission (FNP MMT) represents a step forward in the overall approach to strengthen mud motors to handle the larger diameter coiled tubing projects. As the laterals grow longer, the flow rates and torsional loading of the BHA increases. The FNP MMT is adaptable to any power section on the market.
Benefits
Mechanically designed and optimized specifically for the rigors of the future of extended reach operations.
The material for the flex shaft is optimized for enhanced elongation and deflection properties both to increase stator life while also optimizing stator engagement over the entirety of the thermal cycle.
STANDARD MOTOR
Operating Parameters
| TYPE | STANDARD MOTOR |
| MODEL | 2875 |
| BIT SPEED RPM | 220 - 460 |
| TORQUE FT/LBS | 720 |
| POWER HP | 71 |
| FLOW RANGE GPM (LPM) | 60 - 120 (227-453) |
| MOTOR DP PSI | 1500 |
| TYPE | STANDARD MOTOR |
| MODEL | 2125 |
| BIT SPEED RPM | 180 - 550 |
| TORQUE FT/LBS | 400 |
| POWER HP | 30 |
| FLOW RANGE GPM (LPM) | 25 - 65 (94-246) |
| MOTOR DP PSI | 2000 |
| TYPE | STANDARD MOTOR |
| MODEL | 1688 |
| BIT SPEED RPM | 280 - 700 |
| TORQUE FT/LBS | 170 |
| POWER HP | 10 |
| FLOW RANGE GPM (LPM) | 20 - 50 (76 - 189) |
| MOTOR DP PSI | 1500 |
Physical Dimensions
| TOOL OD INS | 2.875 |
| TOOL ID INS | N/A |
| O.A.L. FT | 13.74 |
| STAGES | 3.6 |
| LOBES | 7/8 |
| CONNECTIONS | 2-3/8" PAC Box x Box |
| RECOMMENDED MILL SIZE | 3-1/4" to 4-3/4" |
| TOOL OD INS | 2.125 |
| TOOL ID INS | N/A |
| O.A.L. FT | 11.00 |
| STAGES | 5.8 |
| LOBES | 5/6 |
| CONNECTIONS | 1-1/2" AMMT Box x Box |
| RECOMMENDED MILL SIZE | 2-1/4" to 3-1/2" |
| TOOL OD INS | 1.688 |
| TOOL ID INS | N/A |
| O.A.L. FT | 7.20 |
| STAGES | 3 |
| LOBES | 5/6 |
| CONNECTIONS | 1" AMMT Box x Pin |
| RECOMMENDED MILL SIZE | 1-13/16" to 2-3/8" |
Operating Parameters
| TYPE | STANDARD MOTOR | STANDARD MOTOR | STANDARD MOTOR |
| MODEL | 2875 | 2125 | 1688 |
| BIT SPEED RPM | 220 - 460 | 180 - 550 | 280 - 700 |
| TORQUE FT/LBS | 720 | 400 | 170 |
| POWER HP | 71 | 30 | 10 |
| FLOW RANGE GPM (LPM) | 60 - 120 (227-453) | 25 - 65 (94-246) | 20 - 50 (76 - 189) |
| MOTOR DP PSI | 1500 | 2000 | 1500 |
Physical Dimensions
| TOOL OD INS | 2.875 | 2.125 | 1.688 |
| TOOL ID INS | N/A | N/A | N/A |
| O.A.L. FT | 13.74 | 11.00 | 7.20 |
| STAGES | 3.6 | 5.8 | 3 |
| LOBES | 7/8 | 5/6 | 5/6 |
| CONNECTIONS | 2-3/8" PAC Box x Box | 1-1/2" AMMT Box x Box | 1" AMMT Box x Pin |
| RECOMMENDED MILL SIZE | 3-1/4" to 4-3/4" | 2-1/4" to 3-1/2" | 1-13/16" to 2-3/8" |
AVENGER MOTOR
Operating Parameters
| TYPE | HARDCORE MOTOR |
| MODEL | SSS 150 |
| BIT SPEED RPM | 232 - 464 |
| TORQUE FT/LBS | 805 |
| POWER HP | 71 |
| FLOW RANGE GPM (LPM) | 60 - 120 (227-453) |
| MOTOR DP PSI | 1290 |
| TYPE | HARDCORE MOTOR |
| MODEL | SS150 |
| BIT SPEED RPM | 270 - 680 |
| TORQUE FT/LBS | 256 |
| POWER HP | 30 |
| FLOW RANGE GPM (LPM) | 20 - 50 (76-190) |
| MOTOR DP PSI | 1500 |
| TYPE | HARDCORE MOTOR |
| MODEL | SS100 |
| BIT SPEED RPM | 216 - 433 |
| TORQUE FT/LBS | 131 |
| POWER HP | 10 |
| FLOW RANGE GPM (LPM) | 20 - 40 (76 - 151) |
| MOTOR DP PSI | 600 |
Physical Dimensions
| TOOL OD INS | 2.875 |
| TOOL ID INS | N/A |
| O.A.L. FT | 13.74 |
| STAGES | 3.5 |
| LOBES | 5/6 |
| CONNECTIONS | 2-3/8" PAC Box x Box |
| RECOMMENDED MILL SIZE | 3-1/2" to 4-1/2" |
| TOOL OD INS | 2.125 |
| TOOL ID INS | N/A |
| O.A.L. FT | 11.00 |
| STAGES | 6 |
| LOBES | 5/6 |
| CONNECTIONS | 1-1/2" AMMT Box x Box |
| RECOMMENDED MILL SIZE | 2-1/4" to 3-1/2" |
| TOOL OD INS | 1.688 |
| TOOL ID INS | N/A |
| O.A.L. FT | 8.60 |
| STAGES | 2.3 |
| LOBES | 5/6 |
| CONNECTIONS | 1" AMMT Box x Pin |
| RECOMMENDED MILL SIZE | 1-13/16" to 2-3/8" |
Operating Parameters
| TYPE | HARDCORE MOTOR | HARDCORE MOTOR | HARDCORE MOTOR |
| MODEL | SSS 150 | SS150 | SS100 |
| BIT SPEED RPM | 232 - 464 | 270 - 680 | 216 - 433 |
| TORQUE FT/LBS | 805 | 256 | 131 |
| POWER HP | 71 | 30 | 10 |
| FLOW RANGE GPM (LPM) | 60 - 120 (227-453) | 20 - 50 (76-190) | 20 - 40 (76 - 151) |
| MOTOR DP PSI | 1290 | 1500 | 600 |
Physical Dimensions
| TOOL OD INS | 2.875 | 2.125 | 1.688 |
| TOOL ID INS | N/A | N/A | N/A |
| O.A.L. FT | 13.74 | 11.00 | 8.60 |
| STAGES | 3.5 | 6 | 2.3 |
| LOBES | 5/6 | 5/6 | 5/6 |
| CONNECTIONS | 2-3/8" PAC Box x Box | 1-1/2" AMMT Box x Box | 1" AMMT Box x Pin |
| RECOMMENDED MILL SIZE | 3-1/2" to 4-1/2" | 2-1/4" to 3-1/2" | 1-13/16" to 2-3/8" |
SLO SPEED MOTOR
Operating Parameters
| TYPE | SLO SPEED MOTOR |
| MODEL | 288S |
| BIT SPEED RPM | 132 - 364 |
| TORQUE FT/LBS | 800 |
| POWER HP | 75 |
| FLOW RANGE GPM (LPM) | 60 - 120 (227-453) |
| MOTOR DP PSI | 1290 |
| TYPE | SLO SPEED MOTOR |
| MODEL | 213S |
| BIT SPEED RPM | 170 - 480 |
| TORQUE FT/LBS | 300 |
| POWER HP | 35 |
| FLOW RANGE GPM (LPM) | 20 - 50 (76-190) |
| MOTOR DP PSI | 1500 |
| TYPE | SLO SPEED MOTOR |
| MODEL | 169S |
| BIT SPEED RPM | 116 - 333 |
| TORQUE FT/LBS | 150 |
| POWER HP | 12 |
| FLOW RANGE GPM (LPM) | 20 - 40 (76 - 151) |
| MOTOR DP PSI | 600 |
Physical Dimensions
| TOOL OD INS | 2.875 |
| TOOL ID INS | N/A |
| O.A.L. FT | 11.74 |
| STAGES | 2.5 |
| LOBES | 5/6 |
| CONNECTIONS | 2-3/8" PAC Box x Box |
| RECOMMENDED MILL SIZE | 3-1/2" to 4-1/2" |
| TOOL OD INS | 2.125 |
| TOOL ID INS | N/A |
| O.A.L. FT | 9.00 |
| STAGES | 4 |
| LOBES | 5/6 |
| CONNECTIONS | 1-1/2" AMMT Box x Box |
| RECOMMENDED MILL SIZE | 2-1/4" to 3-1/2" |
| TOOL OD INS | 1.688 |
| TOOL ID INS | N/A |
| O.A.L. FT | 6.60 |
| STAGES | 2 |
| LOBES | 5/6 |
| CONNECTIONS | 1" AMMT Box x Pin |
| RECOMMENDED MILL SIZE | 1-13/16" to 2-3/8" |
Operating Parameters
| TYPE | SLO SPEED MOTOR | SLO SPEED MOTOR | SLO SPEED MOTOR |
| MODEL | 288S | 213S | 169S |
| BIT SPEED RPM | 132 - 364 | 170 - 480 | 116 - 333 |
| TORQUE FT/LBS | 800 | 300 | 150 |
| POWER HP | 75 | 35 | 12 |
| FLOW RANGE GPM (LPM) | 60 - 120 (227-453) | 20 - 50 (76-190) | 20 - 40 (76 - 151) |
| MOTOR DP PSI | 1290 | 1500 | 600 |
Physical Dimensions
| TOOL OD INS | 2.875 | 2.125 | 1.688 |
| TOOL ID INS | N/A | N/A | N/A |
| O.A.L. FT | 11.74 | 9.00 | 6.60 |
| STAGES | 2.5 | 4 | 2 |
| LOBES | 5/6 | 5/6 | 5/6 |
| CONNECTIONS | 2-3/8" PAC Box x Box | 1-1/2" AMMT Box x Box | 1" AMMT Box x Pin |
| RECOMMENDED MILL SIZE | 3-1/2" to 4-1/2" | 2-1/4" to 3-1/2" | 1-13/16" to 2-3/8" |
ALL METAL MOTOR
Operating Parameters
| TYPE | ALL METAL MOTOR |
| MODEL | 2875 |
| BIT SPEED RPM | 183 - 550 |
| TORQUE FT/LBS | 890 |
| POWER HP | 93 |
| FLOW RANGE GPM (LPM) | 50 - 150 (189 - 568) |
| MOTOR DP PSI | 1950 |
Physical Dimensions
| TOOL OD INS | 2.875 |
| TOOL ID INS | N/A |
| O.A.L. FT | 13.66 |
| STAGES | 3.8 |
| LOBES | 9/10 |
| CONNECTIONS | 2-3/8" PAC Box x Box |
| RECOMMENDED MILL SIZE | 3-1/4" to 4-3/4" |
Operating Parameters
| TYPE | ALL METAL MOTOR |
| MODEL | 2875 |
| BIT SPEED RPM | 183 - 550 |
| TORQUE FT/LBS | 890 |
| POWER HP | 93 |
| FLOW RANGE GPM (LPM) | 50 - 150 (189 - 568) |
| MOTOR DP PSI | 1950 |
Physical Dimensions
| TOOL OD INS | 2.875 |
| TOOL ID INS | N/A |
| O.A.L. FT | 13.66 |
| STAGES | 3.8 |
| LOBES | 9/10 |
| CONNECTIONS | 2-3/8" PAC Box x Box |
| RECOMMENDED MILL SIZE | 3-1/4" to 4-3/4" |
TUBING CLEANOUT TOOLS
Tool Applications
For the removal of well-bore deposits, slot cutting, sand jet perforating and cutting tubulars for work over and P&A operations.
Design Features & Benefits
Available for industry standard tubular sizes
Multi-configurations to suit any application
Interchangeable Orifice to match hydraulic requirements
Hardened bodies and splash back protection
Corrosion Resistant materials
Tool Applications
For the removal of well-bore deposits, slot cutting, sand jet perforating and cutting tubulars for work over and P&A operations.
Design Features & Benefits
Available for industry standard tubular sizes
Multi-configurations to suit any application
Interchangeable Orifice to match hydraulic requirements
Hardened bodies and splash back protection
Corrosion Resistant materials
VENTURI JET JUNK BASKET
Tool Applications
For recovering large or small debris from the well bore, can be used in fishing and milling appIications.
Design Features & Benefits
Available in a range of sizes
Suitable for high temperature environments
Suitable for torque-thru applications
Range of cages available
Range of screens available
Range of extension tube lengths available
Tool Applications
For recovering large or small debris from the well bore, can be used in fishing and milling appIications.
Design Features & Benefits
Available in a range of sizes
Suitable for high temperature environments
Suitable for torque-thru applications
Range of cages available
Range of screens available
Range of extension tube lengths available
TUBULAR/CASING SCRAPER
Tool Applications
For the removal of mud cake, cement residue, rust, scale, paraffin, perforation burrs and other obstructions from inside walls of tubulars.
Design Features & Benefits
One piece mandrel construction
Available for industry standard tubular sizes
Multi-configurations to suit any application
Hi-Grade wear resistant blades
Corrosion Resistant materials
Tool Applications
For the removal of mud cake, cement residue, rust, scale, paraffin, perforation burrs and other obstructions from inside walls of tubulars.
Design Features & Benefits
One piece mandrel construction
Available for industry standard tubular sizes
Multi-configurations to suit any application
Hi-Grade wear resistant blades
Corrosion Resistant materials